How to do a manual entry on a Digital Tachograph

How to do a manual entry on a Digital Tachograph

Digital Tachograph Manual Entry

Many new truck drivers might struggle with different tachograph entries. In this article we will explain how to do a manual entry on a digital tachograph.

When would you need to enter a manual entry?

Manual entries are entered into your tachograph unit using the buttons available. This shows work done after you remove your driver’s card the previous day.

In most cases when you’ve removed your card on a previous shift you don’t necessarily complete your working hours right away. For example, upon returning to the yard you may have removed your card, then spend additional time completing work related duties such as cleaning your truck.

Let’s say you worked an additional hour after pulling your card. In this instance, you would need to make a manual entry the following day to show the additional hour you worked. This shows that you were doing other work during that hour prior to leaving work.

What are the steps to enter a manual entry?

(The instructions below work on most tachographs, slight variations or designs may differ)

  1. Insert your card into the tachograph unit.
  2. The display will show when the driver’s card was last removed. It will then show 1M Entry addition? (1 manual entry addition?) with the default “yes” click OK on menu selection.
  3. Using the down arrow to select the cross hammers located below the letter M, click OK on the menu selection.
  4. You are now able to use the down arrow to change the date on the bottom line to the previous date required and press OK on the menu selection.
  5. After completing part 4 you will now be able to use your arrows to change the time to the actual time you finished your shift. Change the hours to the correct finish time and click OK. It will move over to enable you to change the minutes to the correct time and click OK. Upon setting this time you will now be returned to today’s date. How to do a manual entry on a Digital Tachograph
  6. The tachograph display will now show the mode on rest click OK, today’s date click OK, now you will need to enter your actual start time for your shift today. You might have started your shift at 06.00 hours but it’s now showing 06.20 hours. Change the time to 06.00 hours by using the down arrow until the correct time is showing and click OK and then do the same for the minutes.
  7. Now you’ll be returned to another screen showing the actual time and show that you’re on break! You will need to change the mode to cross hammers as you are now working. IMPORTANT: You will need to change the time to 1 minute after the time you entered as your start time. So if you started at 06.00hours enter 06.01 hours. You will now see 06.01 on the top line and the correct time below OK this and then OK your start country.

Heres a video to help you

Loading

Conclusion – How to do a manual entry on a digital tachograph

Doing a manual entry can seem confusing, but once you have done it a couple of times it will become fairly straightforward. Manual entries are done to show the hours of other work that you have done when your card has not been in the machine. A manual entry needs to be done correctly to keep your tachograph records to avoid possible infringements.

Try out a manual entry simulator yourself

Try Simulator

Loading